background image

Jetter AG

Safety | 2

JVM-206-K00-O21 User Manual

6 / 32

2 Safety

2.1 General information

When placed on the market, this product corresponds to the current state of sci-
ence and technology. 
In addition to the operating instructions, the laws, regulations and guidelines of
the country of operation or the EU apply to the operation of the product. The op-
erator is responsible for compliance with the relevant accident prevention regula-
tions and generally accepted safety rules.

2.2 Purpose

2.2.1 Usage other than intended

Do not use the device in technical systems for which a high level of fail-safety is
required.

Machinery Directive

This device is no safety-related part as per Machinery Directive 2006/42/EC, and
must, therefore, not be used for safety-relevant applications. This device is NOT
intended for the purpose of personal safety, and must, therefore, not be used to
protect persons.

2.3 Warnings used in this document

 DANGER

High risk

Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.

 WARNING

Medium risk

Indicates a potential hazardous situation which, if not avoided, could result in
death or serious injury.

 CAUTION

Low risk

Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.

NOTICE

Material damage

Indicates a situation which, if not avoided, could result in malfunctions or material
damage.

Содержание JVM-206-K00-O21

































Отзывы: