Jetter JVM-104-O15 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 60

background image

Jetter AG

Maintenance and repairs | 9

JVM-104-O15 User Manual

55 / 60

9 Maintenance and repairs

9.1 Maintenance, repairs and disposal

Maintenance

This device is maintenance-free.
Therefore, for the operation of the device no inspection or maintenance are re-
quired.

Repairs

Defective components could cause dangerous malfunctions and could compro-
mise safety.
Only the manufacturer is allowed to repair the device.
Do not open the device!

Disposal of obso-
lete equipment

The device must be disposed of in accordance with the Environmental Product
Declaration EPD. Applicable local environmental directives and regulations must
be complied with. This product must be disposed of as waste electronic equip-
ment. Waste packaging material must be recycled or reused.

Modifications and
alterations to the
device

Modifications and alterations to the device and its functions are not allowed. In
the case of modifications to the device, any liability is excluded.

The original parts are specifically designed for the device. Parts and equipment
from other manufacturers must, therefore, not be used.

Any liability for any damages resulting from the use of non-original parts and
equipment is excluded.

9.2 Storage and shipment

Storage

When storing the device observe the environmental conditions given in chapter
“Technical specifications”.

Shipment and pack-
aging

The device contains electrostatically sensitive components which can be dam-
aged if not handled properly. Damages to the device may impair its reliability.

To protect the device from impact or shock, it must be shipped in its original
packaging, or in an appropriate protective ESD packaging.
In case of damaged packaging inspect the device for any visible damage, and in-
form your freight forwarder and the Jetter AG of the damage caused during ship-
ment. If the device is damaged or has been dropped, it is strictly forbidden to use
it.

«
...
53
54
55
56
57
...
»

Содержание JVM-104-O15





























































Отзывы:

Нет отзывов

Похожие инструкции для JVM-104-O15

Бренд: Wasp Страницы: 16

Бренд: KELCO Страницы: 36

Бренд: Balboa Страницы: 74

Бренд: Cadac Страницы: 4

Бренд: YASKAWA Страницы: 49

Бренд: M-system Страницы: 17

Бренд: POLA Страницы: 2

Бренд: Fox Страницы: 5

Бренд: Valco baby Страницы: 8

Бренд: TEL Страницы: 26

Бренд: Vimar Страницы: 32

Бренд: Comet Страницы: 9

Бренд: Blue Point Engineering Страницы: 12

Бренд: IFM Страницы: 41

Бренд: Duco Страницы: 16

Бренд: Raypak Страницы: 2

Бренд: 4D systems Страницы: 6

Бренд: Phoenic Mecano Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды