Jetter AG
Mechanical installation | 5
JVM-104-O15 User Manual
16 / 60
5.3 Installing the HMI
The illustration below shows how to install the device:
2
3
4
5
1
6
Fig. 6:
Installation drawing
1
2 x self-locking nuts
2
4 x screw for fixing to the
JVM-104-O15
3
RAM Mount ball
4
Mounting plate with opening for
connector
5
2 x countersunk screws for
mounting a RAM Mount ball
6
Alternate position of the RAM
Mount ball
1.
Screw the desired RAM Mount attachments onto the mounting plate.
2.
Hold the JVM-104-O15 against the mounting plate from behind. The connec-
tors must be accessible through the openings in the mounting plate.
3.
Screw the mounting plate onto the JVM-104-O15.
Installing the strain
relief
Install strain reliefs for the connecting cables.
■
Ensure that there is sufficient clearance between the strain reliefs and the con-
nectors.
■
Connectors must not be obstructed, so that they can be removed in the event
of service.
Fig. 7:
Installing the strain relief