2
Copyright 2017 Advanced Computer & Network Corp. All Right Reserved.
CubeView Client
In general case, one management computer installs the CubeView client software which
will periodically check the status of the
JetStor
series systems attached to the servers via
the CubeView agents. The CubeView client software plays the role of central management
to monitor and manage the
JetStor
series systems.
CubeView Agent
The CubeView agent software is installed in the servers which are connected to the
JetStor
series systems. The CubeView agent software plays the agent role. It receives the SES
command from the CubeView client and communicates with the
JetStor
series systems via
SES protocol, and then replies to the CubeView client.
CAUTION:
The SAS HBAs or SAS RAID cards must support SES protocol. Otherwise,
the CubeView will not work properly.
INFORMATION:
The CubeView software is running in the client mode by default. Please
refer to the chapter 2.2.5
section in the chapter Getting
Started for the details of agent mode setting.
Most of the Windows operation systems are supported by the CubeView CMS as below
table.
Table 1-1
Operation System Compatibility
Mode
Operation System
CubeView Client/Agent
Microsoft Windows Server 2008
Microsoft Windows Server 2012
Microsoft Windows 7
Microsoft Windows 8
Microsoft Windows 10
Содержание 824JXD
Страница 12: ......
Страница 25: ...Getting Started 13 Figure 2 14 About CubeView...
Страница 31: ...Management and Monitoring 19 Figure 3 5 All SAS Ports Access All Drives Configuration...
Страница 33: ...Management and Monitoring 21 Figure 3 7 SAS Ports and Disk Drives Divided into Two Groups Configuration...