Management and Monitoring
17
3. Click the
SAS Zoning
tab to view all available SAS ports and disk drives.
4. Check or uncheck the disk drive slots to join in the SAS port. The disk drive slots are all
checked by default.
5. Click the
Apply
button to apply the SAS zoning settings.
Figure 3-3
SAS Zoning Configuration
TIP:
Please note that after applying new SAS zoning configuration, you
must reboot the
JetStor
system to make new zoning configurations
take effect.
After restart the
JetStor
system, server that connected to the SAS port can only detect and
access designated the disk drives according to new SAS zoning configuration. We take
some SAS zoning examples for your reference.
All SAS Ports Access All Disk Drives
The default zoning setting is that all ports can access all drives in the
JetStor
system.
Содержание 824JXD
Страница 12: ......
Страница 25: ...Getting Started 13 Figure 2 14 About CubeView...
Страница 31: ...Management and Monitoring 19 Figure 3 5 All SAS Ports Access All Drives Configuration...
Страница 33: ...Management and Monitoring 21 Figure 3 7 SAS Ports and Disk Drives Divided into Two Groups Configuration...
