JETI model DC-14 II, Руководство пользователя

Страница: 61 / 72

computer radio control system
EN
at logical 0. Using this way you can simply control for example lights
consisting of several LEDs. The fail-safe configuration is applied in
this mode as well as in servo mode.
- DITEX: Support for DITEX servo telemetry
E1/E2: You can choose from these options:
- JETIBOX & Servo – The standard mode for direct servo control.
PPM Positive or negative OUT – the servo signal is summed into a
standard or inversed PPM signal. This option is for devices which can
use single line servo output data. Direct connection of servos in this
mode is supported as well.
- EX Bus – Tells the receiver that it should send all data onto a fast
digital serial link for further processing. This is the recommended
option if you are connecting the receiver to the Central Box or
another EX Bus intelligent device.
- EX Bus Input/Backup - you can use this input for backup from
another DUPLEX receiver.
- S.BUS – Standard S.BUS output
- UDI (12ch or 16ch) - Universal Data Interface - This is a
unidirectional digital serial protocol that can transmit up to 16
channels (12ch default) on a single wire. The UDI is compatible with
several stabilization systems for helicopters and airplanes.
The page Receiver Outputs ( picture )) allows you to redirect your e
transmitter’s channels to any output of the receiver. For convenience
the transmitter’s channel numbers are displayed together with the
appropriate function names, making it easier to adjust. In addition,
you can also set the servo group for each channel. For more
information please refer to your receiver manual.
e)
9.6.1 Support of remote commands for EX Bus devices
The DC/DS transmitters support up to 16 universal commands for
wirelessly connected devices supporting EX Bus. To view the list of
active commands, press the
"F4” CMD button when in the " Model ->
Device Explorer ” menu. However, the command must be detected
before it can be activated. As an example of the use of wireless
commands, the Central Box can be used and its command that resets
the minimum, maximum values and battery capacity (
Clear MIN /
MAX values ).
61