JETI model DC-14 II, Руководство пользователя

Страница: 17 / 72

computer radio control system
EN
3.3.7 Transmitter Gimbals with Switch or Button
Installation
If you want to operate the DC-14 II transmitter using the optional
stick end switch or button functions, you must purchase one or more
of these separately:
• Stick with 2-position switch
• Stick with 3-position switch
• Stick with push-button
• Stick with potenciometer
For installation of the optional gimbal stick ends with
switches/buttons we recommend that you send your
transmitter to one of the factory authorized service
centers or to your authorized dealer.
Advice:
1. Switch off the transmitter and remove the 10 screws that secure
the radio back cover. Next, remove the radio back cover.
Be sure to disconnect the transmitter battery pack
connector.
4. A. Tighten the screw
5. D E Tightening the the screws and sets the desired arresting with
steps and smooth brake.
B. Setting the multi-mode gimbal into the mode with locking
the middle position - elevator
1. A. Loosen the screw
2. B. Slightly lift the lever
3. C B Turn the lock in the direction of the arrow and arrest the lever
in the upper position.
4. C Move the lever in the direction of the arrow to release the lever
B.
5. A. Tighten the screw
6. E D Loosen the screws and in a position so that the tension is
removed from the stick.
17
B
1
A
C
2
3
E
D
5
2
XX YY SS
4
4
3