JETI model DC-14 II, Руководство пользователя

Страница: 16 / 72

computer radio control system
EN
3.3.5 Throttle stick travel adjustment
The throttle stick travel is adjustable to suit your flying style.
1. Switch off the transmitter and remove the 10 screws that secure
the radio back cover. Next, remove the radio back cover. Be sure to
disconnect the transmitter battery pack connector.
2. Use indicated machine adjustment screws to limit the throttle
stick travel. By turning the
screw clockwise, you will
shorten the throttle stick travel.
3. Reconnect transmitter
battery pack and reinstall radio
back cover and cover screws.
After making a limit the throttle
stick travel you must re-
desired smooth tension.
3. Reconnect transmitter battery pack and reinstall radio back
cover and cover screws.
3.3.6 Changing the transmitter mode
The transmitter is equiped with universal multimode gimbals. Both
gimbals are identical and can be adjusted mechanically for modes 1-
5. After mechanical adjustment it is necessary to set a specific
transmitter mode in the menu System – Configuration – Stick mode
1-4.
To change the quad sticks settings, unscrew the back cover of the
transmitter and disconnect the battery connector.
A. Setting the quad stick into the mode without locking the
middle position - gas
calibrate the transmitter stick in the software menu, see section
Calibration of Proportional Controls .
1. A. Loosen the screw
2. C. Lift the lever B so as it is possible to arrest the lock
3. C Turn the lock 90° in the direction of the arrow and arrest the
lever in the upper position. B
16
A B
2
E
D
5
5
1
A
C
B
2
3