JETI model Central Box, Руководство пользователя

Страница: 26 / 42

EN
4.4 Out Pin Set
*CENTRAL BOX*: Out Pin Set – pushing the D button (down arrow)
moves you to basic settings of particular outputs of the Central Box.
• Set Output pin -selection of the slot that will be used for the
following settings. In this menu the output deflection of the
selected output is displayed as a percentage. Y1 is the Central Box
output labeled 1, Y2 is the Central Box labeled 2, etc.
• Function – setup of alternative output functions. This function is
available only for these outputs:
Central Box 2 10/220 :
• Y1 to Y13: Functions - Servo output, digital input, digital
output and Ditex
• Y14 and Y15: Functions - Servo output, Servo output, digital
input, digital output, telemetry input, EX Bus, Ditex, S.BUS
output (only for Y15), telemetry input, and EX Bus
• E1/R3: Functions - Telemetry input, JETIBOX, EX Bus and
receiver
Central Box 100:
• Y1 to Y8: Functions - Servo output, digital input, digital
output
• OUT/IN: Digital input and digital output
• EXT1: Functions - Telemetry input, JETIBOX and EX Bus
• SetInChannel – assigns the input channel (marked as Chx) to a
specific output (marked as Yx)
• Reverse – reverses the output direction
• Signal Fault - setting behavior of the receiver in case of signal loss
• hold - repeats the last valid deflection command before
signal loss
• out off – does not generate any signal for servo in case of
signal loss
• FailSafe – transition to preset deflection of individual outputs
• FS position – setup of the selected output deflection in case of
signal loss
25 EN