JETI model Central Box, Руководство пользователя

Страница: 10 / 42

EN
2.3 Magnetic switch
( Central Box 210/220)
The magnetic switch is used to turn the CB 210/220 ON or OFF . The
magnetic switch is connected to Central Box 210/220 by the
interconnection cable from normal Master port on the magnetic
switch to a slot labeled "SW" on the Central Box 210/220.
To turn on
the Cent r al Box using the magnetic switch it is necessary to hold the
supplied magnet carrier (key) to the target so that the carrier (key)
and the target on the magnetic switch are properly oriented
(align the dots).
Green LED
- flashing LED signals proper detection of the magnet key
- steady LED signals “
ON ” state
When the magnet key is held to the target in the proper orientation,
the green LED glow steadily after 1 second indicating that the
electronic switch is turned “
ON ”.
Switching „OFF” is done in a similar manner, when the magnet key
is held to the target in the proper orientation, after 1 second, the
green LED goes off and the system switches off.
If the switch is not plugged in the Central Box, the Central Box is
switched “
ON ”.
The system remembers whether it has been switched “ ON ” or „OFF” .
If the system is switched “ ON ” via the magnetic switch and then the
power supply is disconnected, when the batteries are re-connected
to the system automatically returns to the “
ON ” state. For safety
Fig. 3 : Description of magnetic switch and the key
Key
Target
Led On
9 EN