JETI model Central Box, Руководство пользователя

Страница: 19 / 42

EN
3.6 Alternative functions – digital output
In the digital output mode, only the logical level 1 or 0 is generated
on the port configured this way. The value of this output is
reflecting the assigned output channel and its level. If the servo
position of the specified receiver channel is lower than 0%, i.e.
1.5ms (the decision limit point can be set by the user using the
„Trigger" parameter), the output is set to permanent log. 0 (i.e. 0V). If
the servo position is higher than 0%, log. 1 (i.e. 3.3V) will be
generated on the pin.
In the digital output mode, no control
servo pulses are generated for that particular pin. With digital
outputs, the Central Box is even able to control devices that do not
use servo impulse as their input, e.g. lights, sound generators, etc.
different voltage. The pin works exclusively in PullUp mode.
Fig. 12 configuration of servo output pin as digital output
Central Box
1
+Vcc
Log.1 – 3.3V
Log.0 - 0V
Imax=5mA
4.7k W
18 EN