Jetblack Safety JS-606 Series, Инструкция по эксплуатации

Страница: 10 / 17

10 of 17
4. SET-UP / OPERATION
•
The extractor is powered directly from the Cleaning Booth via two IP67 Blue Cable Mount 2P+E Industrial
Power Plugs, Rated At 16A, 230 V and one IP67 Blue Cable Mount 2P+E Industrial Power Plug, Rated At 32A,
230 V.
•
Connect the Booth Ø8mm air tube to the hose-tail located on the fan discharge spigot. (See extractor overview
section for further information.)
•
The extractor is controlled via the Cleaning Booth and will operate automatically without warning. Extreme
caution is advised when carrying out any maintenance to the equipment. All electrical connections should be
removed from the Cleaning Booth.
•
When any Booth door is opened this automatically starts the extractor.
•
The extractor will keep running until the Booth door is opened again. This starts the countdown sequence for
the extractor to shut down.
•
If the Booth door has not been opened for 5 minutes the extractor will shut down.
•
The filter shaker motor will then operate for 30 seconds to remove any build-up of dust in the filter.
•
After this operation the system shuts down.