Test Report No.: 17702074 003
Part I of II
Page 70 of 72
EN 1870-19:2013
Clause
Requirement
Remarks - Results
Verdict
c) elongation at rupture:
A
≥ 20 %;
d) hardened to
HRC over depth of at least 0,5 mm.
H.2.4
Sampling
N/A
The test is carried out with the guard and/or a sample of
the guard material. The guard support shall be equivalent
to the guard mounting on the machine. For testing guard
materials samples may be used, fixed on a frame with an
inner opening of 450 mm × 450 mm. The frame shall be
sufficiently rigid. The mounting of the sample shall be by
non positive clamping.
N/A
H.2.5
Test procedure
N/A
The impact test shall be executed with projectile indicated
in H.2.3 and an impact speed of 70 m s
-1
± 5 %.
Impact shall be as square to the material sample surface
or the guard surface as possible. The targets for the
projectiles shall be the weakest and most unfavourable
spot on the guard or in the centre of the material sample.
N/A
H.3
Results
N/A
After the impact damages found on the guard or material
shall be assessed as follows:
a) buckling/bulging (permanent deformation without
crack);
b) incipient crack (visible only on one surface);
c) through crack (crack visible from one surface to the
other);
d) penetration (projectile penetrating the test object);
e) guard window loosened from its fixing;
f) guard loosened from guard support.
N/A
H.4
Assessment
N/A
The test is passed if there is no through crack or
penetration of the test object and if there are no damages
e) and f) in accordance with the requirements of H.3.
N/A
H.5
Test report
N/A
The test report shall give the following minimum
information:
a) date, place of the test and name of the testing institute;
N/A
Содержание JTS-600X
