Jet JTS-600X, Руководство пользователя

Страница: 94 / 152

Test Report No.: 17702074 003
Part I of II
Page 25 of 72
EN 1870-19:2013
Clause Requirement Remarks - Results Verdict
Verification : By checking the relevant drawings,
measurement, inspection of the machine and relevant
functional testing of the machine.
5.3.6.1.3 Wedge cutting device N/A
The building site saw shall be equipped with an integral
wedge cutting device (e.g. as shown in Figure 3). This
device shall be so designed that any part which may be in
contact with the saw blade shall be made of plastic, light
alloy or wood. This device may be combined with the
cross cutting fence.
Adjustment and fixing of the integral wedge cutting device
position shall be possible without the aid of a tool.
See also 5.3.8 and Figure 31.
Verification : By checking the relevant drawings, inspection
of the machine and relevant functional testing of the
machine.
Circular saw bench.
N/A
5.3.6.2 Workpiece tables P
5.3.6.2.1 Machine table P
The dimensions of the machine table shall be in
accordance with the requirements of Table F.1 for circular
saw benches and of Table F.2 for building site saws (see
Annex F).
Verification : By checking the relevant drawings, inspection
of the machine and measurement.
See annex F. P
5.3.6.2.2 Extension table P
The machine shall be provided with either a table or with
an extension table such that the distance between the
centre line of the saw spindle and the far end of the table
or extension table is in accordance with the requirements
of Annex F.
On building site saws the extension table shall be capable
of being folded away whilst remaining attached to the
See annex F.