10
General safety regulations
All machines with rotating tools or parts can cause accidents. It is therefore important
that you as an operator are aware of those risks for any accident and that you avoid all
possibilities for accidents.
•
Always use such clothes and personal equipment so you cannot get caught by
rotating tools.
•
Always use protective goggles if there exists a risk for chips or splashes from the
coolant. Follow local instructions if existing.
•
Keep area clean around the machine to avoid stumbling against rotating tools.
•
See to it that the work piece is securely fastened at the table. Never use your hand
to hold the work piece.
•
See to it that the switch is in the 0 (OFF) position when changing tools or when
cleaning the machine.
•
Never brush away chips while the machine is operating.
•
Use sharp tools and the correct speed and feed for the tool. Be sure that the tool is
the correct one for your operation.
•
See to it that the drill head and the table are thoroughly clamped before starting up
the machine.
Installation
•
Avoid installing the machine in a humid, dirty or badly illuminated environment.
•
Be sure that the machine possesses all necessary protections.
•
Electric installations have to be executed by a qualified electrician.
•
Be sure that the machine is steadily put up and positioned.
Using
•
Never use the machine if it lacks necessary protections.
•
Follow applicable regulations for use of machine, regarding personal protective
equipment.
•
Do not operate the machine with loose clothes or jewelry. Use hair-net if necessary.
•
Never strech yourself over the machine when it is running.
•
Never leave the machine when it is running.
•
Always stop the machine when not in use.
Service and maintenance
•
See to that the current is disconnected.
•
Always follow the instructions in this manual.
•
Do not modify the machine without contacting our dealer.
