Jet CL-1640ZX, Руководство по эксплуатации

Страница: 5 / 56

5
21. Keep visitors a safe distance from the work area. Keep children away.
22. Make your workshop child proof with padlocks, master switches or by removing starter keys.
23. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are
careless acts that can result in serious injury.
24. Maintain a balanced stance at all times so that you do not fall or lean against moving parts. Do not
overreach or use excessive force to perform any machine operation. Never force the cutting action.
25. Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for
which it was not designed. The right tool will do the job better and safer.
26. Use recommended accessories; improper accessories may be hazardous.
27. Maintain tools with care. Keep cutting tools sharp and clean for the best and safest performance.
Follow instructions for lubricating and changing accessories.
28. Do not use this machine in a dangerous environment, such as a wet or rain-drenched area, or near
explosive gases. The worksite should be well illuminated.
29. Do not attempt to adjust or remove tools during operation.
30. Turn off the machine and disconnect from power before cleaning. Use a brush to remove shavings or
debris — do not use your hands.
31. Do not stand on the machine. Serious injury could occur if the machine tips over.
32. Never leave the machine running unattended. Turn the power off and do not leave the machine until it
comes to a complete stop.
33. Remove loose items and unnecessary work pieces from the area before starting the machine.
34. The power supply for this machine must be three phase, using four wires, one of which is a grounding
wire. It must be positively grounded to prevent electrical shock and possible fatal injury. Check the
voltage – if there is a local voltage fluctuation, a stabilizer must be installed.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
- - SAVE THESE INSTRUCTIONS - -