Jet CL-1640ZX, Руководство по эксплуатации

Страница: 12 / 56

12
Spindle
The spindle is mounted in the headstock on
precision taper roller bearings, and is hollow to
accept long stock, reducing preparation time
and waste of material. It has a standard D-type
cam lock, and will accept manual or hydraulic
chucks.
Carriage
The carriage (Figure 9) is made from hig h
quality cast iron. Longitudinal feed of the
carriage is effected by a ball screw which is
driven by the servo motor through an elastic
coupling.
Cross Slide
The cross slide (Figure 9) is mounted on the
carriage and moves along a dovetailed slide.
Cross feed is effected by a ball screw which is
driven by a servo motor through a synchro-
geared belt in the pulley box.
Four Way Tool Post
The four way tool post (Figure 9) is mounted on
the cross slide and allows a maximum of four
tools (not provided) to be mounted
simultaneously.
Use a minimum of two
clamping screws when installing a tool.
Tailstock
The tailstock has a heavy duty quill with a No. 5
Morse Taper. It slides on a v-way and can be
locked at any location by a clamping lever.
When the load for the tailstock is especially
heavy, an eccentric shaft at the rear of the
tailstock can be tightened for auxiliary locking.
Work Lamp
The adjustable work lamp (Figure 10) uses a
50W 24V bulb, and has an independent on/off
switch.
Coolant Nozzle
The nozzle (Figure 10) is fully adjustable with a n
independent on/off lever, and is fed from the
coolant pump.
Figure 9
Figure 10