Jet CL-1640ZX, Руководство по эксплуатации

Страница: 16 / 56

16
Pre-Operation Inspection
Before attempting to operate this lathe, the user
should become thoroughly familiar with both its
mechanical functions and CNC programming
functions. Read all provided manuals and
documentation that accompanied this machine.
1. Before operating this lathe, make sure all
necessary parts have proper lubrication.
2. Manually check the working condition of
each part that will be involved in the
operations. Inspect the chuck by tightening
and loosening it.
3. Turn on the power – the power indicator will
light. Run the spindle from low speed up to
high without load. Watch for proper spindle
rotation direction. Lubrication should be
working properly. Turn off the machine and
confirm that braking function is operable.
4. Listen for any strange sounds or vibrations;
if these should occur stop the machine and
resolve the issue.
5. Before proceeding with standard operations,
perform a test run to make sure the program
is correct.
Maintenance
Lathe must be serviced at all
lubrication points and all reservoirs filled to
operating level before the lathe is put into
service. Failure to comply may cause serious
damage to the lathe.
1. After each shift, clean away chips, wipe
exposed parts of the machine, and coat with
oil.
2. Regularly check the tightness of the drive
belts.
3. Regularly inspect the electrical box; remove
any dust.
4. Regularly clean dirt and chips from the
coolant tank. Check coolant level and
change the coolant periodically.
5. Check oil pump level and re-fill as needed.
6. Periodically grease the track upon which the
sliding doors ride.
7. Daily lubricate the tailstock through the ball
oiler (see Figure 13) using Mobil® DTE Light
ISO32.