Jet Hangar A-7D/E Corsair II, Руководство по сборке

Страница: 52 / 66

JHI-A7-06-0001
Have questions? Call us at 562-467-0260 or email larrywjhi@jethangar.com 52
C.1 Assembly Notes
The weapons pylons are included with this kit as an added feature for the scale
enthusiast. The A-7 full sized aircraft rarely flew without pylons, so why should
the model? The installation is simple as hardpoints are already installed in the
wing and the parts are included with the kit.
On the underside of the wing are pilot holes for the wing hardpoints. Carefully
drill and tap the hardpoints to a 4-40 size (be sure not to drill through the wing!).
Note that the orientation of the pylons is perpendicular to the ground and NOT
the wing. Assemble the pylons as shown in the following drawings. Installation
of the wood parts as shown is required. This is done by noting the location of the
hardpoints onto the pylons, routing out the location on the bottom of the pylon
only and then assembling and gluing into place the wood parts. The pylons are
held in place using 2 ea. 4-40x1” screws for each pylon. The 4-40 screw should
be housed in an aluminum tube as shown. This will ensure proper alignment of
the screw without any guess work.