Jet Hangar A-7D/E Corsair II, Руководство по сборке

Страница: 33 / 66

JHI-A7-06-0001
Have questions? Call us at 562-467-0260 or email larrywjhi@jethangar.com 33
47. ‰
Glue the completed assembly onto the top of
the inlet duct in the area from the leading
edge of the wing saddle to front of the
forward wing spar.
Note: Ensure wires and
airline do not interfere with wing spar or
saddle.
‰
Test fit the wing and connect the flap and
aileron connections. Clean up as necessary
any loose wires to allow accessibility to the
accessory panel.
7.0 AIRCRAFT SETUP AND CG
Once all aspects of the assembly have been finished, ensure the aircraft is setup
and balanced as noted below. Note these are recommended start values for the
first flights. These can be tailored to suit personal preferences as desired once
the initial flights have been completed.
‰ Center of Gravity – Center of Gravity – Balance the aircraft at the leading
edge of the wing saw tooth (landing gear down and the tank empty). This
equates to approximately 8-1/4” back from the leading edge of the wing
saddle at the root. DO NOT BALANCE THE AIRPLANE FORWARD OF
THIS MARK; it is already slightly nose heavy! Adjustment of some of the
components may be required to accommodate the CG location, which is
preferable to adding weight.