Jesco EASYPOOL SMART 02, Руководство по эксплуатации

Страница: 4 / 44

4 | EASYPOOL SMART 0 Operating Manual
Before start-up
1.8 Safety instructions for installation, maintenance and
inspection
The operator has to ensure that all assembly, maintenance and
inspection works are done by authorized and qualified technical
operators.
WARNING!
Assembly and maintenance of the equipment are
to be strictly done after disconnecting the device
from the power supply. It must be secured against
reconnection during the works! Auxiliary assemblies
and tools should be dismounted prior to maintain-
ing. Cables are to be attached likewise only in this
condition.
Neglecting of these instructions can lead to severe damages of
device and loss of warranty.
All safety mechanisms and guards must be refitted and reacti-
vated as soon as the work is complete.
NOTICE!
Apart from an incorrect installation also wrong con-
troller settings (default settings, data of the param-
eter and configuration level, and internal changes of
the instrument) can impair or damage the process
normal functions.
There should always be a safety device that is independent of the
controller. Configurations may only be carried out by technical
personnel! If necessary use password protection! Always comply
with the safety regulations and accident prevention laws of the
country of use.
1.9 Self-made modifications and spares procurement
The device may be converted or changed only by qualified tech-
nical personnel.
If the device is incorrectly configured by assembly or service
personnel, faults and hazards can arise during operation. In this
case, the manufacturer declines any liability.
NOTICE!
Genuine spare parts and sensors authorized by the
manufacturer ensure greater safety. Otherwise the
guarantee expires.
NOTICE!
Local safety instructions and applicable regulations
must be observed. The operating manuals of prod-
ucts used in the system must be observed, in par-
ticular the operating manual of the peristaltic pump
which is included separately with the water sampling
station.
2. Before start-up
2.1 Use for intended purpose
The EASYPOOL SMART 0 water sampling station is solely de-
signed for sampling and control applications in the preparation of
swimming and bathing water in swimming pools and whirlpools
not operated in accordance with DIN 19643. The operational
safety of the delivered unit can only be guaranteed when it is
used in conformity with its intended use.
Use for any other purpose is not permitted and will invalidate any
liability under the warranty.
2.2 Scope of delivery
Carefully check the delivery prior to installation to ensure the de-
livery is complete and to check for any transport damage. Con-
tact the supplier and/or carrier regarding any questions concern-
ing the delivery and/or transport damage.
Do not operate defective devices.
Items fixed to the EASYPOOL SMART 0 include:
TOPAX DX SMART controller
Temperature gauge (depending on model)
1- peristaltic pumps (depending on model)
Chlorine measuring cell (depending on model)
Wall holder
0
9
3
6
6
1
5
: ;
8
7
4
2
Fig. .1: Accessories supplied
Also included in the scope of delivery are:
a
Mounting material
b
3 connections with ball valve
c
1- suction lines (depending on model)
d
1- Injection nozzles (depending on model)
e
1- x 5 m pressure line hose (depending on model)
f
10 m sample water line hose
g
sample water connections with G 1/4 male thread
h
REDOX electrode (depending on model)
i
pH electrode
j
Buffer solutions for the pH- (6.8 and 9.7 pH) and REDOX
electrodes (465 mV)
k
Set of decals for use on the water sampling station
l
"Chlorine bleach..." warning decal (depending on model)
2.3 Steps to start-up
After reading the operating manual, assembly and start up the
equipment as detailed in chapter 5.
•
•
•
•
•