INSTALLATION MANUAL
ZPS-
K5.3,
K10.3, K20.3 CLAMPING
MODULE WITH SENSOR
MONITORING, MOUNTING FLANGE
877.426.2504
11
JERGENS INC. · PHONE: 216.486.5540 · FAX: 216.481.6193 /553720 / 553721/
2.2
Technical data for inductive sensor
Unit
Operational voltage range U
10...30
VDC
Output current
<100
mA
Voltage drop at outputs
<2
V at 100 mA
Idle current
<10
mA
Switching frequency
<3000
Hz
Protection class
IP 67
Cable length
0.2
m
Connection plug
S8
Design
Closer PNP
Mounting flange for pneumatic version
2.3
Circuit diagram of the Zero Point System (ZPS)
1 = Open pneumatically
2.4
Operation of the Zero Point System (ZPS)
Opening procedure
:
Pressurise ZPS.
The ZPS will release the pull
stud, enabling it to be
moved in and out of the system. The ZPS will remain
open as long as pressure is applied to the Open
connection.
SUBJECT TO TECHNICAL CHANGES.
