INSTALLATION MANUAL
ZPS-
K5.3,
K10.3, K20.3 CLAMPING
MODULE WITH SENSOR
MONITORING, MOUNTING FLANGE
877.426.2504
SUBJECT TO TECHNICAL CHANGES.
17
JERGENS INC. · PHONE: 216.486.5540 · FAX: 216.481.6193 /553720 / 553721/
Remove installation tool (5)
Screw threaded pin (4) into
ZPS base and glue it in
with soluble thread lock for
stainless steel.
Caution: Do not lift the base of the ZPS via the threaded pin. For this
purpose, it can be screwed back again by one-half turn after contact with
the bottom of the mounting hole.
4.
Pull
S
tud
4.1
Design
1.
Interchangeable pallet
2.
Engagement screw
3.
Pull stud
