background image

6

Make Electrical Connection

This oven is manufactured with a neutral (white) power supply 
wire and a cabinet-connected green (or bare) ground wire twisted 
together.
1. Disconnect power.
2. Feed the flexible conduit from the oven through the opening in 

the cabinet. 

3. Remove junction box cover, if it is present.
4. Install a UL listed or CSA approved conduit connector to the 

junction box.

5. Route the flexible conduit from the oven to the junction box 

through a UL listed or CSA approved conduit connector.

6. Tighten screws on conduit connector.
7. See “Electrical Connection Options Chart” to complete 

installation for your type of electrical connection.

Electrical Connection Options Chart

4-Wire Cable from Home Power Supply

IMPORTANT: Use the 4-wire cable from home power supply in 
the U.S. where local codes do not allow grounding through 
neutral, New Branch circuit installations (1996 NEC), mobile 
homes and recreational vehicles, new construction and in 
Canada.

1. Connect the 2 black wires (B) together using a UL listed wire 

connector.

2. Connect the 2 red wires (C) together using a UL listed wire 

connector.

3. Untwist white wire from green (or bare) ground wire coming 

from the oven.

4. Connect the 2 white wires (F) together using a UL listed wire 

connector. 

5. Connect the green (or bare) ground wire (H) from the oven 

cable to the green (or bare) ground wire (in the junction box) 
using a UL listed wire connector.

6. Install junction box cover.

For Double Ovens

For Single Ovens

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, 
fire, or electrical shock.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 12 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, 
fire, or electrical shock.

A. UL listed or CSA approved conduit connector

If your home has:

Go to section:

4-wire

4-wire Cable from Home 
Power Supply

3-wire

3-wire Cable from Home 
Power Supply

A

½"

(1.3 cm)

½"

(1.3 cm)

A. Cable from home power supply
B. Black wires

C. Red wires
D. 4-wire flexible conduit from oven

E. Junction box

F. White wires

G. UL listed wire connectors

H. Green (or bare) ground wires

I. UL listed or CSA approved 

conduit connector

A
B

C

D

E

F

G

H

I

Содержание JJW2327WS

















Отзывы: