©2004 Maytag Services
16023537
A–3
Junction Box Connection
Junction box is not supplied with cooktop. Junction box
must be U.L. or C.S.A. listed and meet NEC and Mobile
Home Manufactures Association Standards.
• Three-wire conductor junction box allowed for
residential usage in United States.
• Four-wire conductor junction box required in Canada
and for most mobile home installations, but can be
used for residential.
• Refer to local, municipal, and state building codes.
NOTE:
A power cord must not be used.
White
House Wire
Green
Cooktop Wire
White
Cooktop Wire
Black
Cooktop Wire
Red House
Wire
Black
House Wire
Red
Cooktop Wire
3-Wire Electrical Installation
United States Only
Green
Cooktop Wire
Black
Cooktop Wire
White
House Wire
Green
House Wire
Red House
Wire
White
Cooktop Wire
Black
House Wire
Red
Cooktop Wire
4-Wire Electrical Installation
United States or Canada Only
Installation Instructions
Notice To Installer
Follow accompanying instruction carefully.
CAUTION
!
Never use a metal blade to pry knob off. If knob cannot
be easily removed, tuck folds of a dish- towel under
knob skirt and pull upward with steady, even pressure.
Preparation Of Countertop
The cutout in the countertop into which the appliance is to
be installed should be prepared according to the cutout
dimensions given on page 1 of these instructions.
CAUTION
!
Cutout dimensions are critical. Dimensions must be
measured and cut accurately to 1/16" (.16 cm)
to insure proper fit.
Installation Of Appliance
1. Remove the cooktop from the carton and place it
upside down over two soft pads making sure control
knobs do not interfere with any surface.
2. Provide cutout in countertop.
3. Place unit in the cutout.
4. Make electrical wire connection to unit. Consult local
codes for proper power hook-up.
5. Test to insure control knobs operate all elements
properly.
Содержание JEC0530ADB
Страница 17: ...2004 Maytag Services 16023537 A 1 Appendix A...
Страница 21: ...2004 Maytag Services 16023537 B 1 Appendix B...