Jenn-Air JB36NXFXLW00 Скачать руководство пользователя

Страница: 41 / 91

3-7

LOW VOLTAGE STORAGE BIN CONTROL

BOARD

There are two storage bin control boards on

Bottom Mount Models and only one on SXS.

storage bin boards get 14 VDC power from the

Main Control Board board.
The Storage bin control provides the following

functions:

Communicate with one ingredient care center

•

pan each.
Each provides 14 volts DC to an ingredient

•

care center pan to operate the LED lighting

and keypad.
Controls the operation of the motorized air

•

baffle for each ingredient care center pan.

The controls communicate and work together

to provide proper function. The Storage bin

control operates the ingredient care center pan

LED lighting but it does not get direct input on

the position of the refrigerator door switches.

In order to operate the LED pan lighting at

the proper time, the main control monitors the

refrigerator door switches and sends a com-

munication on the data line to let the Storage

bin control know when a refrigerator door is

opened.

Ingredient Care Center

Temperature Control

The control monitors the temperature of each

ingredient care center pan by means of a

thermistor located in the top of each pan.

When cooling is needed the Storage bin control

sends a request to the main control board to

operate the evaporator fan motor. The Storage

bin control board does not have direct control

of the evaporator fan motor. The Storage bin

control also sends a 12 vdc, peak to peak

square wave to the ingredient care center air

door to open the door.
The ingredient care center air door will be in

one of five possible positions based on the

ingredient care center user setting.
The air door will close at any setting when the

proper temperature has been reached. Here are

the four possible positions and temperatures

for each setting.

Closed.

•

- When the refrigerator compartment is call-

ing for cooling and the freezer is satisfied.

This allows the refrigerator to cool faster.

- Any setting when proper pan temperature

has been achieved.

- When the refrigerator is in holiday mode.
- When the refrigerator is in defrost mode.
Deli—40

•

F, open at a 10

angle.

Produce—39

•

F, open at a 20

angle.

Meats—33

•

F, open at a 30

angle.

Quick Chill—25

•

F, open at a 45

angle.

When Quick Chill is selected, the pan

temperature is set to 25

F, and the freezer

temperature is set to –5

F, for one hour. The

evaporator fan motor operates and runs

at high speed until the set temperature is

reached. When the hour has timed out, the

ingredient care center user interface and

the freezer temperature both return to the

previous customer settings.

Note:

The temperatures listed are represen-

tative of what the software program

is set to achieve. Ambient conditions,

food loads and usage will affect actual

temperature.

Содержание JB36NXFXLW00




























































































Результаты поиска

Содержание JB36NXFXLW00

Отзывы:

Похожие инструкции для JB36NXFXLW00

Бренды по названию

Популярные бренды

Jenn-Air JB36NXFXLW00, Техническое образование

Результаты поиска

Содержание JB36NXFXLW00

Отзывы:

Похожие инструкции для JB36NXFXLW00

Бренды по названию

Популярные бренды