Jenn-Air JB36NXFXLW00 Скачать руководство пользователя страница 39

Страница: 39 / 91

3-5

Freezer Thermistor

If the main electronic control board senses an

open or a shorted thermistor, the compressor

and the evaporator fan motor will begin to op-

erate on a timed on and off cycle. The cycle

time is based on current selected temperature

settings.
At mid-settings of 37

F / 3

C, the compres-

sor and the evaporator fan motors will run for

35 minutes, and be off for 25 minutes. Setting

the freezer colder will increase the run time.

Setting the freezer warmer will decrease the

run time.
The compressor will run at minimum speed.

The evaporator fan will also run at minimum

speed, unless the refrigerator compartment

requests a higher speed.

Keypad

If the main electronic control board detects that

the keypad is not working, it reverts to the de-

fault temperature settings of 37

F (3

C) in the

refrigerator, and 0

F (–18

C) in the freezer.

Evaporator Fan Motor

If the evaporator fan motor malfunctions,

the compressor may run at 4500 rpm for an

indefinite period, except during the defrost

periods.

MAX COOL MODE

Max Cool changes the refrigerator tempera-

ture setting to 34

F (1

C) and the freezer to

–5

F (–21

C) for 24 hours. During Max Cool,

the freezer and refrigerator temperature dis-

plays show the new temperature settings, not

the actual temperatures.
In most cases the motors run 100% for more

than 1 hour. The control returns to the previ-

ous user setting after 24 hours, or any time the

temperature settings are changed.

AUTOMATIC MAX ICE

Automatic Max Ice operates any time the ice

maker water valve is energized. The duration

of Automatic Max Ice is 1-1/2 hours. During

Automatic Max Ice the following occurs:

The freezer display shows the user tem-

•

perature settings and not the actual tem-

perature.
The freezer temperature setting changes to

•

–5

F (–21

C).

The evaporator fan runs at 3000 rpm.

•

The compressor runs the entire 1-1/2 hour

•

mode. Speed is determined by the differ-

ence between actual freezer temperature

and –5

F (–21

C).

HOLIDAY MODE

The Holiday Mode may be used for the follow-

ing occasions:

On vacation.

•

Religious observance (Sabbath Mode).

•

When the Holiday Mode is selected, the

•

corresponding backlit blue LED flashes for

5 seconds, and then remains on, to indicate

that the feature is activated.

Содержание JB36NXFXLW00




























































































Результаты поиска

Содержание JB36NXFXLW00

Отзывы:

Похожие инструкции для JB36NXFXLW00

Бренды по названию

Популярные бренды

Jenn-Air JB36NXFXLW00, Техническое образование

Результаты поиска

Содержание JB36NXFXLW00

Отзывы:

Похожие инструкции для JB36NXFXLW00

Бренды по названию

Популярные бренды