Jenn-Air JB36NXFXLW00 Скачать руководство пользователя

Страница: 29 / 91

2-19

NOTE: Keep the top edge of the trim piece flush with the top

of the refrigerator. If the trim is installed so that the top of the

trim is higher than the top of the refrigerator, damage to the

trim could occur when the refrigerator door is opened.

3. Slide the trim toward the back until it snaps into place.

Install Top Grille Filler (standard installation only)

IMPORTANT: The grille panel height allows the necessary airflow

for refrigerator performance. The top grille filler hides the upper

compartment cover behind the top grille. If you choose to modify

the recommended grille panel dimensions, performance will be

compromised.

Custom Wood Panel Models

1. In the custom made (1" x width of grille panel) wood filler

piece, drill a hole

¹¹⁄₁₆

" from each edge.

NOTE: Make sure the hole is centered in the 1" thickness of

the wood piece.

2. Using slotted hex head screws (provided with refrigerator),

fasten an “L” bracket to each end of the wood filler piece.

3. Using hex head blunt screws (provided with refrigerator),

attach the “L” brackets to the top grille mounting plates.

4. Adjust the “L” brackets, so that the wood filler piece is flush

with the bottom of the soffit. Completely tighten the screws.

Side View

Panel Kit Models

1. Align top grille vent (provided in the door kit) with the bottom

edge of the soffit. Use as a template, and mark where to drill

the holes.

2. Using slotted hex head screws (provided with refrigerator),

attach the top grille vent to the soffit.

A. Cabinet side trim
B. Refrigerator door

A. Custom wood filler
B. “L” bracket

C. Grille mounting plate

A. Top grille filler
B. Soffit

C. Airflow

D. Grille panel

E. Door panel

A. Top grille vent
B. Slotted hex head screw

WARNING

Excessive Weight Hazard

Use two or more people to move and install panels.
Failure to do so can result in back or other injury.

WARNING

Broken Glass Hazard

Do not hit refrigerator glass doors.
Protect glass surface and edges during installation or

removal of doors.
Failure to do so can result in serious eye injury or

minor cuts.

Installation Instructions (continued)

Содержание JB36NXFXLW00




























































































Результаты поиска

Содержание JB36NXFXLW00

Отзывы:

Похожие инструкции для JB36NXFXLW00

Бренды по названию

Популярные бренды

Jenn-Air JB36NXFXLW00, Техническое образование

Результаты поиска

Содержание JB36NXFXLW00

Отзывы:

Похожие инструкции для JB36NXFXLW00

Бренды по названию

Популярные бренды