Jema JM-988, Руководство пользователя

Страница: 5 / 18

4
V. Introduction to Basic Operation
1.Start-up operation:
1.Check whether there are tools or foreign objects around the machine.
2.Connect to the gas source, adjust the pressure and ensure the value of pressure gauge is between 0.3-0.35Mpa.
3.After turning on the power, the button indicator lights at the panel will become green and function interfaces
will be displayed on the touch screen.
4.After pressing the resetting key, the machine will be restored to the original state, namely standby state.
5.After pressing the preparation key of sewing machine, the presser foot will be lifted, and the operation
screen will become green and the machine will enter standby state.
2.Original state:(standby state)
3.Button change operation:
1.Press the thickness measuring key (as shown in Fig.1), and then take one button to be used and put it below the pressing plate
for measuring thickness
、
width and adjusting the blocker automatically.( as shown in Fig.2 3 4).
Fig.1
Fig.2
Fig.3
Fig.4
NO. Name of cylinder
State
Name of
magnetic switch
Indicator light of
magnetic switch
Remarks
Cylinder for making gripper
take button
Cylinder for making mechanical
arm move up and down
Needle protection sensor
Manually feeding button
Vice buttons sensor
Fold
At the up
position
It is on when there is
button
It is on
Putting on button
manually
1
2
3
4
5
6
7
8
X0(J2)
X1(J1)
X3(J7)
X4
X6
X7
X10
J28
Thickness measurement button
It is off
It is on
Home position
Correct degree position sensor
Correct degree position
Correct degree position