Jema JM-988, Руководство пользователя

Страница: 4 / 18

Vertical
Shaft
Up&Down
To Clamp
Button
Baffle
Extension
Manual
Feeding
Switch
Blowing
Button
RETURN
“Moving up and down of vertical shaft”: The vertical shaft will move down after pressing this key and
the vertical shaft will move up after pressing this key again.
“Taking button by operating button clamp”: Button clamp will be unfolded after pressing this key and
the button clamp will be folded after pressing this key again.
“Stretching out and drawing back of damper”: The damper will stretch out to block the button
from moving, and the damper will draw back and button can freely move after pressing this key again.
“Manually feeding button”: The engine arm will feed button once after pressing this key.
“Feeding button by blowing gas”: Button feeding will be conducted once by blowing gas after pressing
this key.
“Back”: Return to the precious page after pressing this key.
J9 pressure regulating valve by gas blowing: When buttons are delivered to button feeding track at the vibrating plate,
feed the buttons at the gripper arm through gas blowing, and the recommended air pressure is between 0.3-0.35Mpa.
3
Manually Feeding: Press this key for manually repairing button when there is no button in the gripper.
Thickness Measurement: Pressing this key, lift the pressing plate for measuring thickness, take one button to
be used and place it on the plate, and then release this key.