Jema JM-988, Руководство пользователя

Страница: 2 / 18

I.Overview
Automatic button feeding device is composed of feeding identification mechanism, pneumatic button transmission
mechanism, button rotating and falling mechanism, thickness measuring mechanism, gate adjusting mechanism, mechanical
arm button feeding device, thread loosening mechanism, as well as mechanical, electrical and gas part and control
mechanism. It can be compatible with different brands and models of button sewing machine, featuring quick button
feeding speed, high button feeding stability, small failure rate, significant reduction of labor intensity, inprovement of
production efficiency, simple operation, etc.
II. Technical Parameters
No. Parameter contents
Standard range Remarks
Power supply voltage
Rated power
Package size
Weight
Rated button sewing speed
Continuous button feeding speed
Button feeding stability
Button diameter
Suggested air pressure
110/220V
260W
570 600 520MM
× ×
48KG
19200-24000pcs/8h
28800-31200pcs/8h
99.7%
9-24mm
0.3-0.35Mpa
III. Safety Warning
1.Before installing and using this equipment, users must carefully read the relevant safety precautions, to ensure personal
safety and avoid equipment damage. The company will not bear any responsibility for any personal injury or equipment
damage resulting from failure to comply with the operational requirements of this instructions.
2.Before installation, be ensure the pressing foot working well at the highest area.
3.Before connecting the machine to the power supply, arrange the qualified professional electrician to check the power
supply voltage, frequency, power and other parameters are in line with the identifications of machine nameplate. The metal
casing of machine must be connected to the case of sewing machine using metal wire and then connected to the special
protective grounding wire using grounding wire.
4.During the repair or adjustment of device, cut off the power supply and gas supply to ensure safety.
5.Do not put hands on the moving parts of machine to avoid injury. The total intake source of compressed air should be
between 0.35 and 0.4Mpa.
IV. Introduction to Panel Functions
1
Language