Jema JM-988, Руководство пользователя

Страница: 11 / 18

JACK (JACK) all-in-one machine
Installation Position of Induction Fixing Support
Fig. (9) Before Installation
Installation method:
tear down Fig(10), bottom out the trimming connecting rod, install button attaching
machine sensor in screw hole, adjust the sensor and connecting rod until the spacing
is 0.5mm (sensor light is on), as shown in Fig. (11).
Notes: Don't touch sensor for fear of any damage.
Pull down the back of the nailcatcher machine shell Fig(9),then Electric control
Fig. (10) Before Installation
Fig. (11) After Button Sender Sensor Installation
ZOJE all-in-one machine
Installation Position of Induction Fixing Support
Fig. (12) Before Installation
10
JACK (JACK) all-in-one machine
Installation Position of Induction Fixing Support
Fig. (9) Before Installation
Installation method:
tear down Fig(10), bottom out the trimming connecting rod, install button attaching
machine sensor in screw hole, adjust the sensor and connecting rod until the spacing
is 0.5mm (sensor light is on), as shown in Fig. (11).
Notes: Don't touch sensor for fear of any damage.
Pull down the back of the nailcatcher machine shell Fig(9),then Electric control
Fig. (10) Before Installation
Fig. (11) After Button Sender Sensor Installation
ZOJE all-in-one machine
Installation Position of Induction Fixing Support
Fig. (12) Before Installation