Jefftron LEVIATHAN NGRS, Руководство по установке

Страница: 5 / 24

4
Insertion procedure of Leviathan-NGRS into the gearbox
1. Remove and open the gearbox according to the normal gun disassembly procedure.
2.
Take out all the internals from the gearbox and clean the vaseline, oils after them.
3. Check the gearbox for edges. Grind for smooth surface to prevent Leviathan damage.
4.
Take out these parts out of the gear-
box (not used with the Leviathan).
5. Remove other internals from gear-
box. Prepaired gearbox for installation.
6. Grind these 2 pins to flat, it is nece-
ssary to fit wiring inside the gearbox.
7.
Make 2mm gap into the red area to
insert wiring through this gap.
Gearbox shell modification
Stock gearbox modificaion is necessary to fit Leviathan wiring without damaging them
- see pictures 6 and 7.
Please
skip this part
, if you already bought
CNC gearbox from Retroarms
, because it
has enough room for the wiring.