Jefftron LEVIATHAN NGRS, Руководство по установке

Страница: 15 / 24

14
Change parameters page 1/3
Orange stripe = not paired , green stripe = paired
Paired = loads parameters from Leviathan.
Change parameter -> shows „ writting... „ in the
green stripe.
Text dissapear ->
parameter is saved
Fire modes with
Selector on safe/semi/auto
:
- SAFE : No responding to the trigger pull.
-
Semi
: It fires a single shot per trigger pull.
- Semi/BurstX : A short trigger pull fires a single
shot, a long trigger pull fires a burst.
-
Binary trigger
: Fire semi when a trigger is pulled
and semi again when it is released in less than 3s.
-
BurstX
: Gun shoot a burst per trigger pull.
- BurstY : A short trigger pull fire burstX,
a long trigger pull fire burstX plus burstY bullets.
-
BurstX/Full
: A short trigger pull fires burstX, a
long trigger pull makes an auto fire.
-
Full
: Gun makes auto fire until trigger is released.
- Virtual reload: Pull trigger to reload virtual mag.
- Activate output: Pull trig. to turn ON Ext. output
Burst functions:
It enables you to shoot a set number of BBs on one
trigger pull. It will always complete the burst. Eve-
ry selector has its own burst settings.
Rate of fire:
It is useful for solving problems when RoF is too
high. This function makes breaks between shots
to reduce the RoF. It gives you fast trigger respon-
se even with a very low RoF, just like a real gun.