Jefftron LEVIATHAN NGRS, Руководство по установке

Страница: 17 / 24

16
Change parameters page 3/3
External input - see manual at page 3:
- OFF:
Every signal to Input terminal is ignored.
- Activate output: Ext. output is ON when input is ON.
- Toggle output: Input act like a switch to Ext. output.
- External trigger:
Gun trigger is disabled and repla-
ced by micro switch connected to Input (SIG and GND)
- Burst-3 trigger:
Switch on SIG and GND makes 3
burst fire when it is pressed . Gun trigger is functional.
- AUG trigger: Selector plate detection is disabled.
Gun trigger is set to selector on semi. Micro switch co-
nnected to Input (SIG, GND) is set to selector on auto.
- Empty mag (NO):
Micro switch activates empty ma-
gazine detection, when is connected SIG with GND.
- Empty mag (NC): Inverted function Empty mag (NO)
- Virtual reload:
Micro switch activates virtual maga-
zine reload, when is connected SIG with GND.
External output
-
see manual at page 3:
- OFF: It works only if the Input terminal activates it.
- Motor: It is ON with gun motor + with IN activation.
- Motor + Xs:
It is ON with gun motor with time delay.
- Always on: The output is constantly activated.
Virtual magazine:
Value sets number of shots (70bb here). Gun will stop shooting when virtual mag. reach 0.
Near empty magazine - makes 2 short beeps after each shot before virtual mag. is empty.
Reload delay -
is time when gun can‘t shoot after empty mag. or it is triggered by „Virtual
reload“ (through input port - set as fire mode or change selector position - there and back)
Save or Save as:
You can save these parameters under custom name into your app.
FACTORY RESET: It restores parameters to factory state (password is unchanged).