background image

1

Package contents

- Leviathan-NGRS drop-in module with wiring

- 2x screw and pads to secure it in the gearbox

- 2x Foams to keep device in the place

- Sheet with selector plate stiskers

- 40A fuse, 2x faston, T-Plug, red wire, heat-

shrinks to finish wiring at the battery end

- Leviathan black 40mm round sticker

        - Installation manual

Leviathan - NGRS parameters

- It is processor controlled mosfet with wireless communication. 

- Device paramethers is changed with smartphone via application (Android and iOS).

- Device is fully integrated inside the gearbox instead of the original trigger contacts. 

- It can be fitted into these Tokyo Marui Next Generation guns: M4, SCAR, HK416, HK417.

- It has wires to stock (loose end), mini 40A fuse and deanT to solder after gun assembly. 

- It adds new shooting modes, controls RoF, pre-cocking, active braking, virtual magazine, 

input and output ports, electronic fuse, low battery indication, statistics... 

- Usable for battery with max. 17 volts (max. lipol 4S 14,8V).

Safety warning

- Installation of this device into the gearbox requires advanced technician skills! 

- Please read these informations before installing your device to prevent any damage.

- Short circuit or incorrectly connected battery will cause immediate damage to the de-

vice which is not covered by the warranty. It can lead to fire or even battery explosion.

- Disconnect battery, when you aren‘t using the gun! Otherwise you will fully discharge 

the battery. Because the device drains small amount of current from it all the time.

- Don‘t connect battery when gun pointing towards you, another person or an animal.

- Don‘t modify, repair, put into any kind of liquids or thermal shock the Leviathan.

Содержание LEVIATHAN NGRS

























Отзывы: