Jeep Grand Cherokee SRT 2018, Руководство пользователя

Страница: 90 / 666

with a continuous chime. Speed Warning can be
turned on and off in the instrument cluster
display.
NOTE:
The indication will not turn yellow and flash with
a continuous chime unless the speed is ex-
ceeded by 1.9 mph (3 km/h) or more.
For further information refer to “Instrument Clus-
ter Display Menu Items” in “Getting To Know
Your Instrument Panel.”
The number “55” is only an example of a speed
that can be set.
— Cruise Control Ready Indicator Light
This light will turn on when the speed control has
been turned on, but not set. Refer to “Speed
Control — If Equipped” in “Starting And Operat-
ing” for further information.
— Valet Mode SRT Indicator Light
This light will turn on when Valet Mode is active.
Blue Indicator Lights
— High Beam Indicator Light
This indicator shows that the high beam head-
lights are on. With the low beams activated,
push the multifunction lever forward (toward the
front of the vehicle) to turn on the high beams.
Pull the multifunction lever rearward (toward the
rear of the vehicle) to turn off the high beams. If
the high beams are off, pull the lever toward you
for a temporary high beam on,
" flash to pass "
scenario.
ONBOARD DIAGNOSTIC
SYSTEM — OBD II
Your vehicle is equipped with a sophisticated
Onboard Diagnostic system called OBD II. This
system monitors the performance of the emis-
sions, engine, and automatic transmission con-
trol systems. When these systems are operating
properly, your vehicle will provide excellent per-
formance and fuel economy, as well as engine
emissions well within current government regu-
lations.
If any of these systems require service, the OBD
II system will turn on the Malfunction Indicator
Light (MIL). It will also store diagnostic codes
and other information to assist your service
technician in making repairs. Although your ve-
hicle will usually be drivable and not need
towing, see your authorized dealer for service
as soon as possible.
CAUTION!
•
Prolonged driving with the MIL on could
cause further damage to the emission con-
trol system. It could also affect fuel
economy and driveability. The vehicle must
be serviced before any emissions tests can
be performed.
•
If the MIL is flashing while the vehicle is
running, severe catalytic converter damage
and power loss will soon occur. Immediate
service is required.
Onboard Diagnostic System (OBD II)
Cybersecurity
Your vehicle is required to have an Onboard
Diagnostic system (OBD II) and a connection
port to allow access to information related to the
performance of your emissions controls. Autho-
rized service technicians may need to access
this information to assist with the diagnosis and
service of your vehicle and emissions system.
WARNING!
•
ONLY an authorized service technician
should connect equipment to the OBD II
connection port in order to diagnose or
service your vehicle.
•
If unauthorized equipment is connected to
the OBD II connection port, such as a
driver-behavior tracking device, it may:
•
Be possible that vehicle systems, includ-
ing safety related systems, could be
impaired or a loss of vehicle control
could occur that may result in an acci-
dent involving serious injury or death.
•
Access, or allow others to access, infor-
mation stored in your vehicle systems,
including personal information.
For further information, refer to “Cybersecurity”
in “Multimedia”.
87