Jeep Grand Cherokee SRT 2018, Руководство пользователя

Страница: 163 / 666

Using ACC On Hills
When driving on hills, ACC may not detect a
vehicle in your lane. Depending on the speed,
vehicle load, traffic conditions, and the steep-
ness of the hills, ACC performance may be
limited.
Lane Changing
ACC may not detect a vehicle until it is com-
pletely in the lane in which you are traveling. In
the illustration shown, ACC has not yet detected
the vehicle changing lanes and it may not detect
the vehicle until it’s too late for the ACC system
to take action. ACC may not detect a vehicle
until it is completely in the lane. There may not
be sufficient distance to the lane-changing ve-
hicle. Always be attentive and ready to apply the
brakes if necessary.
Narrow Vehicles
Some narrow vehicles traveling near the outer
edges of the lane or edging into the lane are not
detected until they have moved fully into the
lane. There may not be sufficient distance to the
vehicle ahead.
Stationary Objects And Vehicles
ACC does not react to stationary objects and
stationary vehicles. For example, ACC will not
react in situations where the vehicle you are
following exits your lane and the vehicle ahead
is stopped in your lane. Always be attentive and
ready to apply the brakes if necessary.
Normal (Fixed Speed) Cruise Control
Mode
In addition to Adaptive Cruise Control mode, a
Normal (Fixed Speed) Cruise Control mode is
available for cruising at fixed speeds. The Nor-
mal (Fixed Speed) Cruise Control mode is de-
signed to maintain a set cruising speed without
requiring the driver to operate the accelerator.
Normal (Fixed Speed) Cruise Control can only
be operated if the vehicle speed is above
19 mph (30 km/h).
To change between the different control modes,
push the Adaptive Cruise Control (ACC) on/off
ACC Hill Example
Lane Changing Example
Narrow Vehicle Example
Stationary Object And Stationary Vehicle
Example
160