Jeep Grand Cherokee SRT 2018, Руководство пользователя

Страница: 234 / 666

2. There are glove compartment travel stops on
both sides of the glove compartment door,
partially close the glove compartment door
and push inward to release the glove com-
partment travel stop on one side and repeat
this procedure for the opposite side.
3. Pull the right hand side of the glove compart-
ment door toward the rear of the vehicle to
disengage the glove compartment door from
its hinges.
NOTE:
When disengaging the glove compartment door
from its hinges, there will be some resistance.
4. With the glove compartment door loose, re-
move the glove compartment tension tether
and tether clip by sliding the clip toward the
face of the glove compartment door and
lifting the clip out of glove compartment door.
5. Remove the filter cover by disengaging the
retaining tab and mid way snap that secures
the filter cover to the HVAC housing. Disen-
gage the mid way snap by pulling the door
outward. Unhinge the filter cover on the right
side to fully remove the cover.
6. Remove the A/C air filter by pulling it straight
out of the housing.
7. Install the A/C air filter with the arrow on the
filter pointing toward the floor. When install-
ing the filter cover, make sure the retaining
tabs fully engage the cover.
CAUTION!
The cabin air filter is identified with an arrow
to indicate airflow direction through the filter.
Failure to properly install the filter will result in
the need to replace it more often.
Glove Compartment
1 — Glove Compartment Travel Stops
2 — Glove Compartment Tension Tether
3 — Glove Compartment Door
Right Side Of Glove Compartment
1 — Glove Compartment Tension Tether
2 — Glove Compartment Door
A/C Air Filter Cover
1 — Retaining Tab
2 — Mid Way Snap
3 — Filter Cover Hinge
231