Jeep Compass, Руководство пользователя

Страница: 55 / 322

53
Lock the vehicle
54)
NOTES:
The liftgate will not power open or
close if the gear lever is in gear engaged
position or the vehicle speed is above
0 km/h (0 mph).
If anything obstructs the power liftgate
while it is closing or opening, the liftgate
will automatically reverse to the closed
or open position, provided it meets
sufficient resistance.
There are also pinch sensors attached
to the side of the liftgate opening. Light
pressure anywhere along these strips will
cause the liftgate to return to the open
position.
If the power liftgate encounters
obstructions within the same cycle, the
system will automatically stop. If this
occurs, the liftgate must be opened or
closed manually.
The power liftgate will not operate
in temperatures below
−
30
°
C or
temperatures above 65
°
C. Be sure to
remove any buildup of snow or ice from
the liftgate before pushing any of the
power liftgate switches.
If liftgate is left open for an extended
period of time, the liftgate may need
to be closed manually to reset power
liftgate functionality.
Gas props support the liftgate in the
open position. However, because the gas
pressure drops with temperature, it may
be necessary to assist the props when
opening the liftgate in cold weather.
Before driving off, check the
instrument panel for a liftgate or door
open message or warning indicator.
Failure to do this could result in
unintentionally leaving the liftgate open
while driving.
If your liftgate is power closing and
you put the vehicle in gear, the liftgate
will continue to power close. However,
vehicle movement may result in a
detection of an obstruction.
If the electronic liftgate release handle
is pushed with the power liftgate is
opening, the liftgate motor will disengage
to allow manual operation.
If the electronic liftgate release handle
is pushed while the power liftgate is
closing, the liftgate will reverse to the
full open position.
53) 55)
NOTE Allow the power system to open
the liftgate. Manually pushing or pulling
the liftgate may activate the liftgate
obstacle detection feature and stop the
power operation or reverse its direction.
56)
CARGO AREA FEATURES
Cargo load floor
The cargo load floor system has a load
capacity of 181 kg, to be understood
distributed over the entire surface.
Reconfigurable load platform
The cargo load floor can be adjusted
to three different levels to create more
space in the cargo area. These positions
are: upper (1), middle (2) and lower (3)
fig. 51.
NOTE The lower position is not available
in vehicles equipped with either a
compact spare tire, or a full size spare
tire. The center position is not available
in vehicles equipped with a full size
spare tire.
To change the level of the load floor, pull
upward on the load floor handle, pull the
floor outward, and place the back of the
floor into the desired position. Lower the
front of the floor into place.
51
5520341D
Access to TireKit (or removal of
wheel/space-saver spare wheel)
To raise the load floor for access of
the Tire Service Kit, or spare tire (if
equipped), pull upward on the load floor
handle.