Jeep Compass, Руководство пользователя

Страница: 164 / 322

STARTING AND DRIVING
162
ENABLING / DISABLING THE
SYSTEM
When the engine is started, the system
is disabled (LED on the button in the
dashboard on).
To turn the LaneSense system ON,
push the button (LED turns off). A
dedicated message will appears on the
instrument panel display.
To turn the LaneSense system OFF, push
the button once again (LED turns on).
NOTE The LaneSense system will retain
the last system state ON or OFF from the
last ignition cycle when the ignition is
changed to the ON/RUN position.
VISUAL WARNINGS AND
MESSAGES ON THE DISPLAY
System activated
When the system is enabled and the lane
markings have not been detected, the
lane lines are gray and the
symbol
(white) is continuously illuminated.
Exiting a lane with detection of a single
limit
When the system is active and only,
for example, the left lane limit has been
detected, the symbol
(white) will be
switched on constantly; the system is
ready to provide visual warnings on the
display in the event of unintentional
exiting of the lane (direction indicator
not activated) to the left.
With standard display:
when the
LaneSense system senses the lane
has been approached and is in a lane
departure situation, the left thick lane
line flashes from white to gray, the left
thin line remains solid white and the
symbol changes from solid white to
flashing yellow.
With Premium display: when the
LaneSense system senses the lane
has been approached and is in a lane
departure situation, the left thick lane
line flashes yellow, the left thin line
remains solid yellow and the
symbol
changes from solid white to flashing
yellow.
NOTE The LaneSense system operates
with the similar behavior for a right
lane departure when only the right lane
marking has been detected.
Exiting a left lane with detection of both
limits
When the LaneSense system is ON, the
lane lines turn from gray to white to
indicate that both of the lane markings
have been detected. The symbol
is
solid green when both lane markings
have been detected and the system is
“armed” to provide visual warnings
in the instrument panel display and a
torque warning in the steering wheel if
an unintentional lane departure occurs.
Lanes Sensed (white lines/green symbol
)
With standard display: when the
LaneSense system senses a lane drift
situation, the left thick lane line and left
thin line turn solid white. The
symbol
changes from solid green to solid yellow.
At this time torque is applied to the
steering wheel in the opposite direction
of the lane boundary. For example: if
approaching the left side of the lane the
steering wheel will turn to the right.
With Premium display: when the
LaneSense system senses a lane drift
situation, the left thick lane line and
left thin line turn solid yellow. The
symbol changes from solid green to solid
yellow. At this time torque is applied
to the steering wheel in the opposite
direction of the lane boundary. For
example: if approaching the left side of
the lane the steering wheel will turn to
the right.
Lane detected
With standard display: solid white thick
line, solid white thin line/solid yellow
symbol
.
With Premium display: solid yellow thick
line, solid yellow thin line/solid yellow
symbol
.
With standard display:
When the
LaneSense system senses the lane
has been approached and is in a lane
departure situation, the left thick lane
line flashes from white to gray, the left