Jeep Compass, Руководство пользователя

Страница: 31 / 322

29
could slide under the seat belt, which
could result in serious injury or death.
25) Do not pile luggage or cargo higher
than the top of the seatback. This could
impair visibility or become a dangerous
projectile in a sudden stop or collision.
26) It is extremely dangerous to ride
in a load compartment of the car. In a
collision, people riding in these areas
are more likely to be severely injured or
killed.
27) Do not allow people to ride in any
area of your vehicle that is not equipped
with seats and seat belts.
28) Make sure the backrests are properly
secured at both sides (not visible “red
notches”) to prevent them from moving
forward, in the event of sharp braking,
with possible impact with the passengers.
IMPORTANT
3) The fabric upholstery of the seats has
been designed to withstand long-term
wear deriving from normal use of the car.
Some precautions are however required.
Avoid prolonged and/or excessive rubbing
against clothing accessories such as
metal buckles and Velcro strips which, by
applying a high pressure on the fabric
in a small area, could cause it to break,
thereby damaging the upholstery.
4) Before tilting the backrest, remove any
objects on the seat cushion.
5) Do not arrange objects beneath the
electrically adjustable seat and do not
impede its movement, since the controls
may be damaged. They may also restrict
the seat travel.
HEAD RESTRAINTS
29) 30) 31)
NOTE Do not reverse the head restraints
(making the rear of the head restraint
face forward) in an attempt to gain
additional clearance to the back of your
head.
Front head restraint adjustment
To raise the head restraint, pull upward
on the head restraint. To lower the head
restraint, push the adjustment button
located on the base fig. 24 of the head
restraint, and push downward on the
head restraint.
24
5520436D
NOTE The head restraints should only
be removed by qualified technicians, for
service purposes only. If either of the
head restraints require removal, see a
Jeep Dealership.
29) 32)
Rear head restraints
When the center seat is being occupied,
the head restraint should be in the raised
position.
To raise the head restraint, pull upward
on the head restraint. To lower the head
restraint, push the adjustment button
located on the base of the head restraint
(lateral head restraint: fig. 25 - center
head restraint: fig. 26) and push the
head restraint downward.
25
5520437D
26
5520438D
NOTE The head restraints should only
be removed by qualified technicians, for