Jeep COMPASS 4xe, Руководство пользователя

Страница: 88 / 153

87
ENGINE SWITCH OFF
PROCEDURE
55) 56)
Proceed as follows:

with the car stationary, press the
brake pedal;

bring the automatic transmission lever
to "Park" (P);

release the brake pedal;

move the ignition device to the OFF
position (versions equipped with
mechanical key) or press the START/
STOP ENGINE button fully to switch
off the engine (versions equipped with
Keyless Enter-N-Go system);

engage the electric park brake.
NOTE When the engine is switched on
and off, a metallic noise may be heard
due to the opening/closing of the electrical
contacts. This noise is normal and is not
intended to be an anomaly.
WARNING
55)
Do not leave the vehicle in a poorly
ventilated area with electrical operating
mode on and heat engine switched off, as
the heat engine may start automatically
if the residual charge level of the high-
voltage battery is insufficient. The exhaust
gases generated can cause serious
damage to people and animals.
56)
When leaving the vehicle, you must
set the automatic transmission lever to
"Park" (P). If you unintentionally press the
accelerator pedal or when the automatic
transmission lever is in a position other
than "Park" (P) the vehicle can move
abruptly, resulting in serious injury or
death.