Jeep COMPASS 4xe, Руководство пользователя

Страница: 72 / 153

71
Climate Schedule
This function is used to set the ignition of
the automatic dual-zone climate control
system when the engine is turned off by
selecting the following settings,
fi g. 66:

"Departure Time": time you wish
to leave. The car preconditioning
activation time will be managed
autonomously by the car;

"Allow Climate Schedule to pre-
condition vehicle when battery
level is below 25%": enables the air
conditioning system of the passenger
compartment when the high-voltage
battery charge status is below 25%.
The preconditioning is active even if
the charging cable is not connected to
the charging socket;

"Repeat": allows you to repeat the
function for the selected days of the
week (the days are at the bottom of
the screen).
66 J0B6014
NOTE The temperature set by the
automatic dual-zone climate control
system is the temperature selected before
the engine or climate control system is
turned off.
NOTE To stop the "Climate Schedule"
procedure, either start the engine or press
the OFF button on the automatic dual-
zone climate control system panel.
NOTE Before the comfort temperature
is reached, press and release the door
unlocking button located on the key
with remote control, or on the handle
of the driver's door (for versions with
the Passive Entry system) to unlock the
doors and turn off the alarm (where
provided). Afterwards, before the comfort
temperature is reached, press and release
the ignition device.
NOTE "Allow Climate Schedule to pre-
condition vehicle when battery level is
below 25%" the high voltage battery
charge function will be temporarily
suspended. This depends on the power
consumption of the automatic dual-zone
climate control system compared to that
provided by the public charging station: in
case of redundancy, the air conditioning
will be activated and charging will be
carried out.