Jeep COMPASS 4xe, Руководство пользователя

Страница: 36 / 153

35
18 J0B6030E
19 J0B6031E
20 J0B6032E

remove the protective cover (B) fig. 19
of the charging socket and attach it to
the device (C);

grasp the charging connector
(D)
fig. 20 by the handle, remove the
protective cover (where provided) and
insert it into the charging socket (E),
until you hear the click indicating that
it has been locked

if no scheduled charging has
been set (see the "Charging
functions" chapter), charging starts
automatically;

check by turning on the LEDs on
the cable control unit that there are
no faults in the charging system (for
more information see "Charging status
control unit" in the "Power sources
that can be used - Mode
2 cable"
chapter). If there are no anomalies,
the green LEDs located next to the
charging socket will light up. In case
of anomalies, refer to the description
under "Charging system failure" in the
chapter "Power sources that can be
used -
Mode 2
cable".
NOTE The charge procedure is
interrupted when opening the bonnet: a
dedicated message will be shown on the
instrument panel display. The charge
will be reactivated when the engine lid is
closed correctly.