Jeep COMPASS 4xe, Руководство пользователя

Страница: 38 / 153

37
DISCONNECTING THE "MODE 2"
CHARGING CABLE
During the charging procedure the cable
is automatically locked on the charging
socket in the car.
To complete the charging, proceed as
follows:

unlock the doors of the vehicle
allowing the charging cable to unlock;

disconnect the cable from the vehicle
charging socket by grasping the
handle of the charging connector and
avoiding to pull the cable directly,
fig.
22;

disconnect the cable from the
charging socket, fig.
23;

replace the protective cover of the
charging socket;

close the charging flap, making sure it
locks properly;

roll up the charging cable correctly,
repositioning the protective cover
correctly on the charging connector
(where provided). When rolling up,
take care not to damage the cable.
Then place the cable, together with
the charging kit, inside the bag
located inside the boot.
22 J0B6065E
23 J0B6001E
WARNING Before disconnecting the
charging connector, make sure that the
doors are unlocked. If the door is locked,
the charging connector locking system
does not allow disconnection.