16
User ManUal
Clean:
BULKHEAD
CLEAN
CleanBlast
Advanced Fiber End Face Cleaning System
1.
Install the appropriate cleaning tip
(fCLT-U25 shown)
to the CleanBlast handset.
Note:
See
Appendix B: Cleaning Tips &
Adapters Guide
on page 27.
Cleaning Tip
(FCLT-U25)
1
3
4
2.
Insert the handset into the bulkhead and
push to disengage safety mechanism
(the
POWER/READY light will turn green),
and press
the
run button
to initiate cleaning.
3.
INSPECT
the bulkhead.
4.
Determine whether
clean
or
dirty
.
If clean,
do not touch it and
CONNECT
.
If dirty,
repeat
CLEAN.
Note:
Embedded/mated debris cannot be
cleaned, and bonded/burned debris must be
physically cleaned before using CleanBlast.
run Button
2
PRImE
run Button
Prime Button
(press 2 times)
PRImE / PuRgE
the nozzle to clear the solvent line if
you are using the system for the first time, after refill,
or if the system has been powered oFF for more than
4 hours.
A.
Push the
prime button
quickly
2 times.
B
.
Aim the tip away from any surfaces or objects.
C.
Press the
run button
on the handset.
D.
Repeat steps A through C
at least 2 more times.
