JDS Uniphase 2000 Platform, Руководство пользователя

Страница: 45 / 123

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset
Connection to the power meter, VFL and Talkset
26 User Manual 790000002/00
Connection to the power meter, VFL and Talkset
The type of optical connector used for the power meter is UPP (Universal
Push Pull), which is compatible with all diameter 2.5 mm connectors (FC,
SC, ST, DIN, E2000, etc.)
Using the Power meter
The power meter function is an option chosen at the time of order and
incorporated into the 2000 Platform in the factory.
To activate the function:
1 Press the H
OME
button
2 Activate the power meter icon of the Platform .
The effect of this action will to be to bring the power meter into use
and to display the Results page for Power Meter.
Configuring the
power meter
Configuring
measurement
parameters
The measurement parameters can be accessed with the
S
ETUP
key.
Fig. 12 Optical connectors
Power meter
optical connection
VFL
Accuracy of measurements
A high degree of accuracy is often required. It is then necessary to
perform a preliminary calibration without the fiber under test to elimi-
nate the losses due to connections as far as this is possible. To do
this, use the «Reference Value» function.
2000 Platform English rev00.book Page 26 Lundi, 20. juin 2011 1:47 13