A-GAGE MINI-ARRAY Features
• Measuring light screen system for
profiling and inspection applications
• Compact control module and sensors
• Controller is programmable, using
DeviceNet configuration software and
supplied EDS files for:
– 8 measurement (“Scan Analysis”)
modes
– 4 scanning methods
– Beam blanking
– Selectable continuous, gated or host-
controlled scan initiation
– Programmable hysteresis for high and
low limits
• Two Discrete outputs
• Separate Gate input allows external
control of scan initiation, for example, by
a presence sensor
• Low cost, compared with similar systems
• Working range up to 17 m (55'),
depending on model
• Wide field of view, easily aligned
(Control Modules MACNXDN-1 and MACPXDN-1 with DeviceNet™ Interface)
Printed in USA
P/N 59437 rev. A
WARNING . . .
Not To Be Used for Personnel Protection
These sensors do NOT include the self-checking redundant
circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized
output condition. Consult your current Banner Safety Products catalog for
safety products which meet OSHA, ANSI and IEC standards for personnel
protection.
!
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]