JDS Uniphase 2000 Platform, Руководство пользователя

Страница: 106 / 123

Chapter 11 Maintenance and Troubleshooting
Maintenance procedure
User Manual 790000002/00 87
5 In the I/O Interfaces box::
– On the line Use proxy , select No , Manual or Auto wether a
proxy is used or not.
6 Once completed, press Exit to return to the Home page.
7 Press, in succession, Expert Tools > Upgrades > Software
Upgrade > Upgrade via Ethernet
.
The message
Verify IP address of PC server
appears.
8 Click on Continue .
The list of the software versions available on the PC is displayed
next to the versions installed on the 2000 Platform.
9 Click on Show Prev choice or Show Next Choice to display the
previous and next versions available.
10 Click on Confirm to start the upgrade of the selected software(s).
or
Click on
Confirm All Choices to upgrade all versions.
Upgrading begins. The 2000 Platform is automatically rebooted.
Upgrading takes several minutes. At the end, the 2000 Platform is
automatically restarted.
Upgrading from
the boot
This method is used to make a complete reinstallation of the software
versions.
1 Turn off the 2000 Platform using the O
N
/O
FF
button, keeping the
equipment connected to the mains.
Fig. 47 Configuration of the Upgrade Server
NOTE
The software versions list does not always appear (cf previous ver-
sions) as well as the
Show Previous / Next Choice buttons and the
Confirm/Continue key. In this case, the upgrading starts automati-
cally.
During the upgrade, the Testing indicator is lit in red. Do not
push any button while the indicator is lit.
2000 Platform English rev00.book Page 87 Lundi, 20. juin 2011 1:47 13